Watersavers WC Stop - save an average of 30% water with each flush, made in the Czech Republic

Product description Watersavers WC Stop - save an average of 30% water with each flush, made in the Czech Republic

Automatic WC Stop by the Czech company Watersavers allows you to easily save several tens of thousands of liters of water annually. The amount of flushed water can be easily measured according to current needs, preventing valuable drinking water from being unnecessarily wasted through the toilet. Simply place it in the flush tank (both wall-mounted and concealed), hang it, fix it - and start saving. Water savings range from 14% to 70%, with a typical setting around 30%, saving approximately 1,200 CZK yearly for a family of four. WC Stop also prevents toilet leaks. Installation is simple and can be done by anyone.

Save Thousands:

An average family flushes the toilet about 6,000 - 7,000 times per year. Using a standard system, where 10 liters of water are used per flush, this amounts to 60,000 - 70,000 liters. WC Stop from Watersavers can save up to 70% of water. However, the typical setting is around 30% savings.

A typical saving for a family of four with a standard saver setting is approximately 2,000 CZK annually. The saving rate is easily adjusted by adding or removing rollers, with one roller equating to approximately 14% water savings.

WC Stop also prevents toilet leaking, which can further contribute to water savings and reduced repair costs.

Changing Water Flow in Toilet Savers:

The basic saver has 5 rollers — flushing with 0.5 liters of water per flush. Reducing the number of rollers extends the closing time of the discharge valve, increasing the volume of flushed water. The amount of flushed water can thus be regulated according to the number of rollers.

Installation of WC STOP in an Automatic WC:

Usage:

WC STOP is placed in the flush tank, where it is hung and fixed into the overflow pipe. If the overflow pipe is equipped with an adjustable lever, you can use it to set the effectiveness of the WC STOP. It is commonly used to regulate the air used and thus the float setting.

Installation Procedure:

Remove the hanging member of the overflow pipe.

Bend the end of the WC STOP so that the edges are caught in the pipe. This will secure the placement of the WC STOP.

Insert and hang the WC STOP into the overflow pipe.

Reattach the hanging member back to its original position. Small flush = 0.5–3 liters, large flush = 3–10 liters.

Additional Information:

Watersavers is a purely Czech company that manufactures its products in the Czech Republic, providing jobs for Czech people.

Water is the foundation of life, extremely valuable, and increasingly scarce for humans.

It's worth saving not only from an economic perspective.

Product code

• WAS007